GAS LOCK INFORMATION

During the suction stroke of the pump assembly the gas comes out of solution and expands due to the low pressure of the fluid inside the pump. This expanded gas displaces fluid in the pump and reduces the amount of fluid pumped per cycle of pump operation. It often even reaches the point where no fluid is lifted by the pump because the pump merely operates on a charge of gas, alternately compressing and expanding it, and a pump efficiency consequently drops to zero.

This is due to the fact that with a large volume of the relatively compressible gas, the pressure between the standing valve and traveling valve on the pump down stroke never reaches high enough level to overcome the hydrostatic pressure of the fluid on top of the traveling valve to open the traveling valve and pump the gas upward out of the pump.

Horizontal wells can be particularly subject to gas interference as they do not have a sump or cellar, which on vertical wells can act as a natural downhole gas separator.

THE GAS BAILER VALVE & GAS LOCK

The Gas Bailer Valve has been proven to eliminate Gas Lock.

Over 1675 Gas Bailer (Anti Gas Lock) Valves have been sold to be run on rod pumps in the Eagle Ford Shale, Permian Basin, New Mexico, Utah and Canada since March of 2013, with proven success.

A 1 ¼” Gas Bailer Valve installed on rod pumps with Gas Interference/Gas Lock issues resulted in production increasing from 69 bbls per day to 85 bbls per day, eliminating the need to tap bottom. 8 month pump changes were no longer required.